Difference between revisions of "Fabrication and Assembly Guide"

From UCLA Miniscope
Jump to: navigation, search
(Ordering standard parts)
(Ordering standard parts)
Line 17: Line 17:
 
Grin lenses can be ordered through Grintech.
 
Grin lenses can be ordered through Grintech.
  
'''Please refer to the [[Part Lists\part list]] for part number and supplier.'''
+
'''Please refer to the [[Part Lists|part list]] for part number and supplier.'''
  
 
== Assembling MINIscope housing ==
 
== Assembling MINIscope housing ==

Revision as of 16:09, 28 April 2015

This page will walk you through the steps of building your own MINIscope system.

Ordering custom parts

The filter set, MINIscope body, and Printed Circuit Boards (PCBs) need to be custom made. Below you will find all the information you will need to order these parts.

Filter set

MINIscope housing

Printed circuit boards

Ordering standard parts

Screws, magnets, and wires can all be ordered through McMaster-Carr.

Electronic components can be ordered though Digikey.

Optical lenses can be ordered through Edmund Optics.

Grin lenses can be ordered through Grintech.

Please refer to the part list for part number and supplier.

Assembling MINIscope housing

Building cables

Assembling electronics

Flashing DAQ firmware

Installing DAQ software