Difference between revisions of "Head Mounted Scope"

From UCLA Miniscope
Jump to: navigation, search
(Overview)
Line 1: Line 1:
 
== Overview ==
 
== Overview ==
 
The head mounted scope consists of a machined Delrin housing, optical filters and lenses, an excitation light source, and CMOS imaging sensor. The mass of the system in under 3 grams and connected to the DAQ hardware using a single coaxial cable. The body and optical components can be easily hand assembled using only forceps and a torx T2 driver.
 
The head mounted scope consists of a machined Delrin housing, optical filters and lenses, an excitation light source, and CMOS imaging sensor. The mass of the system in under 3 grams and connected to the DAQ hardware using a single coaxial cable. The body and optical components can be easily hand assembled using only forceps and a torx T2 driver.
[[File:MiniscopeExplodedLabled.PNG]]
+
[[File:MiniscopeExplodedLabled.PNG|500px]]
 
[[File:MiniscopeCalibrationSlide.png]]
 
[[File:MiniscopeCalibrationSlide.png]]
  

Revision as of 18:45, 4 January 2016

Overview

The head mounted scope consists of a machined Delrin housing, optical filters and lenses, an excitation light source, and CMOS imaging sensor. The mass of the system in under 3 grams and connected to the DAQ hardware using a single coaxial cable. The body and optical components can be easily hand assembled using only forceps and a torx T2 driver. MiniscopeExplodedLabled.PNG MiniscopeCalibrationSlide.png

Optical Path

MiniscopeOpticalPath.png

Machined Delrin Housing

Aluminum Baseplate

Optical Components

CMOS Imaging Sensor PCB

Excitation LED PCB

Guides and Tutorials